Custom sizes
Is there a specific place in your room where there should be an absorber or diffuser? Unfortunately, the space is so special that all the standard modules won't fit? Maybe you just want an ultra thick absorber or a smaller acoustic partition in front of the drum kit? No problem! Because we at MW-Acoustics offer you the ability to realize your individual desired size from our popular acoustic elements series "Premium". To make this possible, we manufacture in our in-house production with CnC milling machines to ensure consistent quality that will blow you away.
- Absorber "Premium"
- Ceiling panel "Premium"
- Diffuser "QRD7"
- Basstrap "Premium"
- Partition wall "Premium"
- Acoustic curtain "Studio"
- Basstrap "Extreme"
Absorber
"Premium"
The Premium broadband absorber can be used wherever disturbing reflections need to be eliminated in order to improve room acoustics. Perfect for front walls, side walls and rear walls, but also as a ceiling panel.
Manufacturing standards
- Made from 12mm multiplex
- Fabric covering on both sides
- As wall mounted absorber or ceiling panel
Diffuser
"QRD7"
The QRD7 is a very good choice to disperse harsh reflections and, together with absorbers, to achieve a balanced sound reproduction. They provide a wide dispersion and improve the room acoustics significantly.
Manufacturing standards
- Made from 9mm multiplex
- There are always 7 compartments
- The total width is always 50 cm
Basstrap
"Premium"
With the Bass Trap Premium you get a linear sound image in the lower frequency range and fight disturbing room modes, so your productions sound tidier and much more detailed in the bass range.
Manufacturing standards
- The length of the rear sides is always 50 cm / 50 cm
- A wooden lid goes on the top and bottom to seal the module
Partition wall
"Premium"
The solution to many problems - For mobile separation and insulation of sound sources in difficult places in the room. With our partition walls you are prepared for every possible scenario.
Manufacturing standards
- Made from 12mm or 18mm multiplex depending on the size
- Fabric cover on both sides
Acoustic curtain
The heavy and solid acoustic curtain by MW-Acoustics is a perfect solution to effectively absorb sound over a large area. The opening or closing of the curtain allows variable room acoustics. Here you can freely configure your own acoustic curtain to your desired size.
Manufacturing standards
- The width has to be either 145 cm or 295 cm.
- Comes with 2 or 3 layers
Basstrap
"Extreme"
The basstrap to end them all - For very low frequency ranges where other bass traps fail. You only need one bass trap for each corner of the room.
Manufacturing standards
- With external wooden frame or complete fabric cover
- Max. 238 cm height, 118 cm width and 12 or 24cm construction depth
